Contactor Panel

Included with Purchase

Each panel comes with (1) timer and your choice of Single or Dual contactor.

Purchase Seperately

• Switches: Switches are not included; you can order an on/off or duplex switch from Infratech or you can use your own 3rd party 120V switch.
• Faceplate: You will need to purchase a faceplate of your choice, the switches above will only include the “guts.”
• Gang Box: You will need topurchase a standard two gang box, this will house both the switch and the timer like in photo below.
• Flush mount access door: If you are recessing the panels into the wall, you will need to purchase the access door separately.

This is a (2) part system that must be ordered a la carte for a complete unit. Panel + Switch = Complete unit.
Contactor panel must be installed indoors in a dry well-ventilated space.

How it Works

Contactor panel can be ordered as a single contactor, or a dual contactor panel and whichever heaters are connected to each contactor will be controlled together.

• Each contactor in the panel can handle up to 6,000 watts max at 240VAC.
• Wattages do not need to match, but they cannot exceed 6,000 watts.
  Example: A 4,000 watt Single element Heater and a 2,000 watt single element heater can both be controlled at the same time and operate on a single contactor.
• Example: (4) 3,000 watt heaters can be controlled in pairs of two on a dual contactor panel.

• Example: You can control a 6,000 watt dual element heater with a dual contactor panel

Shop Contactor Panels